Soft wall skirts are made of artificial grass, brocade, imitation thick flowers, and other soft fabrics lined with foam plastic, mineral wool, and other materials to cover ordinary hard wall skirts. Generally, soft wall skirts are expensive, labor-intensive, time-consuming, and expensive. However, the texture is soft, the touch is soft, and the texture is rich. The wall decoration will produce an elegant and graceful atmosphere in the interior of the room through the soft wrapping. Soft wall skirts have been widely used in modern homes that pursue individuality.

The construction method of a soft wall skirt is relatively simple, and it can be divided into the following steps:

1. Deal with the wall: first, the elastic line on the wall is divided into files, and the wooden grid studs are nailed with round nails and wooden bricks.

2. Nail frame: choose a 2 X 3cm wooden square nail wooden frame, the size is 210 X 40cm, the thickness is 2cm, the wooden frame material is preferably made of softwood such as red pine, white pine, poplar, forged wood, etc. It is not easy to crack when nailing. After the wooden frame is nailed, a layer of plywood is nailed. In order to reduce the cost of the wall skirt, fiberboard can also be nailed, but two more wooden square strips should be nailed to the wooden frame.

3. Bread: Bread with 1cm thick soft foam block and artificial leather or decorative cloth. The foam block and artificial leather are cut into large pieces of size 210X40cm. First, lay the foam on the board, and then lay the leather on the foam. Nail the foam and artificial leather to the wooden frame on the back of the board at one end of the paved board, and then use the same method to nail the other end. When wrapping the nails, force the foam and artificial leather to level and tighten. On one side of the long side of the nail, use a wooden square with a width of 22mm, a length of 2100mm, and a thickness of 20mm to press the nail on the foam and artificial leather wrapped on the side. The number of pieces required for wall skirt decoration is uniformly nailed and wrapped.

4. Installation: When installing, start from the door according to the drawn height line. The side with the wooden square is close to the door. Use steel nails to nail the upper and lower ends of the wooden square and the board to the wall. Welt's nails. When installing the second board, place the side with the wooden square on the side of the first board without the wooden square, and use the same method to nail, but also pull the nail diagonally from the wooden square, and connect the wooden square of the second board to the first board. The boards are connected as a whole, and so on for subsequent assembly.

5. Decoration: After the interior wall skirt boards are uniformly nailed, use decorative glue to stick the wide golden curved slats on the wooden square between the two boards. The width of each golden curved board is 22mm, which is the same as the width of the wooden square. The upper end of the board is capped with a 120mm wooden board with 3X3 aluminum profile tea corners to make the bottom of the skirting line cover the nail marks.